cursorapikey.com/Guide
Cursor Subscription vs API Key: Which Costs Less
Cursor subscription vs API key comes down to one number: how many tokens you use in a month. A flat plan costs the same whether you code for an hour or a hundred, while a key bills only for what you send.
Updated


Key points
- A typical 40-request coding session costs about $0.166 at $0.15 per 1M input and $0.50 per 1M output tokens.
- Light and medium use cost a few dollars to about $11 a month on the API; heavy daily use reaches roughly $37.
- A subscription may include features a custom key does not replace, such as built-in autocomplete.
- Look up the current plan price yourself, then divide it by the cost per session to find your break-even.
The decision in one formula
Take the monthly price of the plan you are considering, check it on Cursor's pricing page since it changes, and divide it by what a typical session costs on the API. The result is the number of sessions per month at which the two options cost the same. Below that number the key is cheaper. Above it, the flat plan wins on price alone.
The rest of this article gives you a realistic cost per session, three usage profiles, and the non-price differences that can outweigh a few dollars.
A note on honesty: the numbers below use our own rates only. We do not quote Cursor's prices or other providers' prices, because they change and you should read them at the source. Everything here is arithmetic you can redo with your own session size.
What one coding session costs on the API
Rates are $0.15 per 1M input tokens and $0.50 per 1M output tokens. Coding chats are input-heavy, because every request carries code context, and output is short by comparison.
Take a session of 40 requests. Each sends about 25,000 tokens (open files, history, instructions) and gets back about 800 tokens.
- Input: 40 x 25,000 = 1,000,000 tokens, so 1 x $0.15 = $0.15.
- Output: 40 x 800 = 32,000 tokens, so 0.032 x $0.50 = $0.016.
- Total: $0.166 per session.
Your sessions will differ. A long agent run with large context costs more; a quick question about one function costs a fraction of this. Treat the figure as a starting point, not a promise. Measure your own by reading the usage field in responses, or watch the X-Balance-USD header drop between requests.
Three usage profiles, 22 working days
| Profile | Sessions per day | Sessions per month | Monthly API cost |
|---|---|---|---|
| Light | 1 | 22 | $3.65 |
| Medium | 3 | 66 | $10.96 |
| Heavy | 10 | 220 | $36.52 |
Each figure is sessions x $0.166, rounded to the cent. Suppose a plan cost $20 a month (a made-up number for the math, so use the real one). Then the break-even is 20 / 0.166, about 120 sessions a month, or roughly five and a half sessions per working day. Under that, the API is cheaper. Over it, the flat price is.
The minimum top-up is $20, and credit never expires, so a light user can add $20 once and spend it over many months. There is no monthly fee, which means an idle month costs nothing.
What a subscription gives you that a key does not
Price is only part of it. A subscription usually bundles things that a custom key does not replace. Features that rely on Cursor's own models, such as inline autocomplete, are typically tied to the plan, and some agent features depend on models you cannot swap. Check Cursor's current documentation for the exact split, because it changes between versions.
A subscription also hands you the choice of several leading models behind one price. A key gives you one model, uncensored, which is an open-weight model run by an independent provider and tuned to answer without content refusals for lawful adult use. It is not an official API of any model vendor. If you need the strongest available code model for a hard problem, the plan may serve you better. If you need a model that does not refuse legitimate requests, or you want predictable per-token spending, the key fits.
Many people use both: the plan for autocomplete and heavy lifting, and the key for chat with a model that behaves differently. See alternatives to Cursor if you are weighing other editors too.
Other things that change the math
- Rate limits. A full key allows 8 concurrent requests and 300 requests per minute. A trial key allows 2 and 60. Flat plans have their own limits, so compare them to your habits.
- Context size. The window here is 100,000 tokens, prompt plus completion. A request that stuffs the whole window costs about 100,000 / 1,000,000 x $0.15 = $0.015 in input. Dozens of those add up quickly, so trim context.
- Waste. Failed or refused requests are not charged. Retries after errors cost nothing extra, while a flat plan has no per-request cost at all.
- Bonuses. Top-ups from $50 add 5%, from $100 add 10%, from $200 add 15%. A $200 top-up is worth $230 of credit.
Whichever way you lean, keep an eye on the biggest driver: input tokens per request. Closing unused tabs and excluding build folders from context reduces them on either option.
A worked month for a mixed workload
Real months are uneven. Say you work 22 days. On 12 of them you do one light session ($0.166 each), on 8 you do three sessions, and on 2 crunch days you do eight. That is 12 + 24 + 16 = 52 sessions, which is 52 x $0.166 = $8.63. A top-up of $20 would last a little over two months at that pace, and the leftover balance stays in the account.
Now add an agent habit. If you let an agent loop over a large repo, a single run can send 30 requests with 60,000 tokens of context each. That is 1.8M input tokens, or $0.27, plus say 30,000 output tokens, $0.015. One run costs about $0.285. Ten such runs in a month add $2.85. Even with that habit the monthly total here is $11.48, so agent work is not automatically expensive, but long contexts multiply fast.
The lesson is to measure, not guess. Log the usage field from a few real sessions before you decide.
How to keep API spending low
- Send less context. Include the file being edited and the files it imports, not the whole repository. Input tokens dominate the bill.
- Start fresh chats. A long conversation resends its whole history every time. A new chat for a new task resets the count.
- Cap output where it helps.
max_tokensis optional, but a limit stops an overlong answer from running up the output side at $0.50 per 1M. - Watch the balance header.
X-Balance-USDtells you what is left after each call. - Retry politely. On a 429 with
Retry-After: 5, wait five seconds instead of looping.
Setting up the key to test it
The cheapest way to decide is to try it for a week. Claim the $0.50 trial on the API key page after signing up with Google or email. It is valid for 7 days and needs no card. In Cursor's model settings, enter your key, turn on the base URL override with https://api.cursorapikey.com/v1, and add a custom model named uncensored.
To check the connection outside the editor:
from openai import OpenAI
client = OpenAI(base_url="https://api.cursorapikey.com/v1", api_key="YOUR_KEY")
r = client.chat.completions.create(
model="uncensored",
messages=[{"role": "user", "content": "Explain what a mutex is in two sentences."}],
)
print(r.usage.prompt_tokens, r.usage.completion_tokens)
If it errors, the guide on using the Cursor API and the documentation list the usual causes. Track your token counts for a week, multiply by the rates, and compare with the plan price. Details on the rates are on the pricing page.
More guides
Questions and answers
Is an API key cheaper than the Cursor subscription?
For light and medium use, usually. Under the example above, about 66 sessions a month costs around $11 in tokens. Heavy daily use can pass the price of a flat plan, so check the current plan price.
Can I use both at once?
Yes. Keep the plan for features tied to it and add your own key for the models you choose in chat.
What does one request cost?
At $0.15 per 1M input and $0.50 per 1M output tokens, a request with 25,000 input and 800 output tokens costs $0.00375 plus $0.0004, about $0.0042.
Does credit expire?
No. Credit never expires, and there is no subscription fee on the API.
Your key is one form away
Create an account, copy the key, change the base URL. That is the whole setup.